Archives

Categories

Accessories

All of our models come with a variety of fan accessories to help them work for your specific application. Click on the fan type you’re looking for to see a list of options available.

For any questions regarding specific accessories, you can always contact us.

  • Belt Guards
     
    a cage-like metal box that covers the belt and pulley.
     
  • Fan Guards (Inlet & Outlet)
     
    bolt mounted to the flanged end of the fan drum.
     
  • Powder Coat Booth cvmin
    Coatings
     
    Contact Americraft to discuss your specific fan application and we will help you select the best finish to meet your needs.
     
  • Inspection Access Door
     
    A removable steel panel bolted to the side of the fan drum to allow access for inspection (not replacement) of fan parts.
     
  • Flange
    Matching Flange
     
    a stand-alone flange that can be mounted to duct work and connected directly to the fan inlet or outlet flange.
     
  • Motor & Belt Cover
     
    a cage-like metal box that covers the motor, belt and pulley.
     
  • Horizontal Mounting Brackets cvmin
    Mounting Brackets – Horizontal
     
    (4) brackets, (2) each welded on each end of the fan drum with pre-drilled holes to enable horizontal mounting of fan.
     
  • Vertical Mounting Brackets cvmin
    Mounting Brackets – Vertical
     
    (4) brackets welded to the flange of the fan drum with pre-drilled holes to enable vertical mounting of fan.
     
  • Mounting legs cvmin
    Mounting Legs
     
    a solid steel support bolted to the bottom of the fan drum to provide standing support.
     
  • VP motor sheave
    Variable Pitch Motor Sheave
     
    provides flexibility to change the fan speed in the field to balance system needs (check motor amp load before and after changing the fan speed). 1- and 2-groove available.
     
  • Aluminum Rub Ring
     
    Aluminum ring around the inside of the fan drum to improve fan’s spark-resistance
  • Aluminum Automatic Shutters
     
    a rear flanged gravity exhaust shutter ideal for use with direct-drive or belt-driven wall exhaust fans.
     
  • BSWS transparent 2
    Birdscreen for shutter
     
    Wire mesh cover mounted over shutter for increased fan protection
     
  • Front Guard – Welded Wire
     
    guard mounted to the fan panel in front of the prop  Available for sizes 12″ through 48″. Sizes 54″ & 60″ available as wire mesh.  Meets OSHA requirements.
     
  • Motorized Air Supply Damper ACP version cvmin
    Galvanized Motor-Operated Center-Pivot Damper
     
    a motorized volume control damper used for exhaust or supply applications.
     
  • Heavy Duty Fan & Shutter Mounting Box
     
    Simplifies mounting in block, concrete or metal walls.  Also maintains the proper distance between the propeller and shutter.
     
  • inlet weather hood cvmin
    Inlet Weather Hood with Bird Screen
     
    mounted to the exterior wall to shelter the fan from wind, rain and birds/animals.  Recommended for intake fans.
     
  • Manual Shutter 2
    Manual-Operated Shutter
     
    Automatic shutter with pull-chain
     
  • MTR 556 SP Closed cvmin
    Motor Kit
     
    includes 115V power-open/spring-close actuator to provide tighter closure of exhaust shutter.
     
  • Expanded Metal Rear Box Guard
    Rear Box Guard – Expanded Metal
     
    box guard mounted to the rear of the fan panel.  Available for sizes 12″ through 72″.  Meets OSHA requirements.
     
  • Formed Five Wire Rear Box Guard cvmin
    Rear Box Guard – Welded Wire
     
    box guard mounted to the rear of the fan panel.  Available for sizes 24″ through 60″.  Meets OSHA requirements.
     
  • Rear Propeller Guard cvmin
    Rear Spiral Guard – Model 900
     
    guard mounted between the motor and prop (factory installed only). Available up to 42″
     
  • ssbx website
    Solid Side Mounting Box
     
    An extension of our heavy duty mounting box to encase the entire fan.
  • 1900 AD
    Access Door (1900B)
     
    In fan box to allow for shutter removal from outside
     
  • Powder Coat Booth cvmin
    Coatings
     
    Contact Americraft to discuss your specific fan application and we will help you select the best finish to meet your needs.
     
  • damper section website
    Damper Section Only
     
    with Mounting Ring
     
  • 1900 filter box
    Filter Boxes (1900B)
     
    Included with filter racks and throwaway filters
     
  • Motorized Air Supply Damper ACP version cvmin
    Galvanized Motor-Operated Shutter (1900B)
     
    Center-pivot intake damper mounted in fan box
     
  • Automatic Shutter 1 1
    Gravity Shutter (1900B)
     
    Available for intake and exhaust
     
  • 1900 hood
    Hood (1900B)
     
    Replacement part for 1900B ventilator
     
  • Insulated Roof Curbs
     
    flat, single-, or double-pitch. A standard curb for all power roof exhausters measuring 8″ high with wood nailer.  Must specify type of roof construction and the roof pitch.  Not available for corrugated or standing seam roofs.  Contact Americraft for further information.
     
  • Magnetic Latches for Damper Section
     
    Magnets to keep damper section lids from opening from anything besides fan airflow
     
  • 2Untitled cvmin
    Rain-tight Disconnect Switch
     
    the switch provides a safe and easy way of disconnecting power from the roof exhauster.  Switch is factory mounted and wired for customer specified voltage.
  • Flexible Hose
     
    wire reinforced rubber hose available in 5′ sections. Stainless Steel hose clamps also available.
     
  • Inlet/Outlet Flange
     
    cast aluminum flange mounted to blower inlet and/or outlet to assist connection to ANSI pipe flanges.  Supplied undrilled unless otherwise directed.  Not available in down blast configuration.
     
  • Inlet/Outlet Guard
     
    a guard that protects objects from entering the unducted inlet or outlet side of the blower. Meets OSHA requirements.
     
  • Filter on Blower Housing cvmin
    Inlet Filters
     
    filters the air passing through the inlet side of the blower with cleanable wire mesh material.
     
  • Motor Weather Cover
     
    a cage-like metal box that covers the motor (pictured is epoxy coated and specially designed to fit explosion-proof motor).
     
  • Slide Gate Damper
     
    Installed on the discharge side of the blower.  Allows for reduction of CFM to assist with balancing of system requirements.
     
  • shaft seal
    Teflon Shaft Seal
     
    seals motor shaft hole opening with minimal air leakage.
     
  • Wall Mounting Bracket
     
    Allows for mounting of centrifugal blower
  • 2 Fixed 2 Swivel Casters
    Caster Sets
     
    includes two fixed and two swivel locking casters available on medium and low stands.
     
  • Powder Coat Booth cvmin
    Coatings
     
    Contact Americraft to discuss your specific fan application and we will help you select the best finish to meet your needs.
     
  • Manual Starter Switch 2
    Manual Starting Switch
     
    includes built-in overload protection, mounted & wired for fans with TEFC motors only. NEMA I Enclosure.
     
  • Steel prop 1
    Steel Propeller
     
    Replace the cast aluminum propeller with a fabricated steel one based on fan environment.

24-Hour Heating & Cooling

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s standard dummy text ever.

Quick Links

Contact Info

Facebook-f Twitter Instagram

About Us

At Ochoa Industries, we provide custom design solutions for industrial and marine applications. Our specialties include ventilation, noise control, and explosion-proof air conditioning, focusing on performance and safety.

Quick Links

Quick Links

Contact Info

Copyright © 2025 Ochoa Industries, All rights reserved.